I’m here to show off my latest build with the Kythera engine. I have to say, it’s been a bit of a rocky start and I’ve had to reach out to PolarStar numerous times to get some help to work out the kinks. Kudos to Mike from PolarStar who’s always been very responsive and helpful. In the end, all of the issues were a result of minor installation issues and I’m happy to report, that it’s running really strong right now. It still needs some fine-tuning due to accuracy but I’m getting closer.
At the time of this post, I am very new to this hobby. My daughter and I were introduced in October of 2022 and we are already both pretty well hooked. This is my second AR and only HPA rifle in that short time. I have a G&G AEG with various upgrades, including motor, barrel, hopup, bucking, nub spring, etc. My daughter’s Specna Arms AR is still pretty stock and was solid right out of the box. We both have GBB pistols and are slowly finding our way.
Links to the various parts
-
- G&G Combat Machine CM16 SRL (Battleship Grey)
- Prometheus 6.03 EG Tight Bore Inner Barrel
- EMG / Maxx Model CNC Aluminum Hopup Chamber
- EMG Atlas Hop-Up Bucking
- BCM GUNFIGHTER Vertical Grip
- Rocket Airsoft High Torque Neodymium Motor
- Action Army Steel Power-Up M120 Spring
- Angel Custom CNC Advanced Stainless Ribbed Airsoft AEG Cylinder
- Monstrum Ghost UltraCompakt Micro 3X Magnifier
- UUQ Red Dot Sight Compact Red Dot Sight
- Feyachi FL11-MB Tactical Flashlight 1200 Lumen
- Specna Arms / Rock River Arms Licensed CORE Series M4 AEG
- BCM GUNFIGHTER Vertical Grip
- Monstrum Marksman Series 3X Micro Prism Scope
- Rechargeable 1000 Lumens Tactical Flashlight Visible Red Laser
most everything is from evike.com but the red dots and flashlights are from amazon
My buddy, who introduced me to airsoft has an entire lineup of HPA rifles for him and his sons. So naturally, I got more interested in them as well. Enter the Krytac Trident MKII. It started its life as the “Foliage Green” color but as you can see I rectified that straight away. Speaking of straight away, I never even fired the gun as an electric rifle. Within minutes of unboxing, I was already breaking the gun down in preparation for the Kythera, 363mm long Prometheus barrel, MAXX hopup chamber, etc.
Unlike some AEGs, the Krytac Gen2 gearbox did need some modifications so that the air hose could be routed. I had already picked up an Amped air line and quickly found that it was going to be a real challenge to get that line to bend without kinking. Eventually, I ended up heating the plastic line that came with the Kythera, using a heat gun and shaping it so that it made the 100-degree bend and down through the grip. I also added a silicone hose over the top of the plastic line in the grip area to give it a bit more support. I used some heat shrink as well to clean up the installation. What you may or may not notice is the tiny zip-tie I used to make sure the quick-release fitting didn’t unintentionally quickly release which I found to be a problem when connecting/disconnecting the main airline.
Links to the Krytac build:
-
- Krytac Full Metal Trident MKII CRB
-
- PolarStar “Kythera” HPA Engine
- EMG Guardian Mock Suppressor
- BCM GUNFIGHTER Kinesthetic Angled Grip
- 363mm Prometheus 6.03 EG Tight Bore Inner Barrel
- APS M4 CQB-R Convertible Barrel Adapter
- EMG / Maxx Model CNC Aluminum Hopup Chamber
- PTS Enhanced Polymer Grip
- 558 Green Red dot Sight +G3X 3Magnifier
- M600B Scout Light, 600 Lumens Tactical Flashlight
most everything is from evike.com but the red dot and flashlight are from amazon
As for the Kythera itself, I really dig all of the engineering that when into this engine. I love the trigger feel and even more, dig the idea that there are so many ways to tweak the trigger action and feel to fit your preferences. I’ve had two issues with the initial setup of the Kythera, all of which can be blamed on the engine’s location in the gearbox. Once the gearbox position is dialed, all has been good. Now I just need to make sure the nozzle alignment is dialed to get the best possible performance.
One thought on “My First HPA Build: Kythera-Krytac”